Sunday, October 30, 2011

Biesemeyer 78-963 T-Square Anti-Kickback Snap-In Spreader for Delta Contractors Table Saw

Biesemeyer 78-963 T-Square Anti-Kickback Snap-In Spreader for Delta Contractors Table Saw Review

Product Feature

Designed to reduce dangerous kickbacks, this spreader snaps on instantly and removes easily from Delta and other table saws.
T-squares, anti-kickback spreaders
Simple installation--snaps on instantly and removes easily
Designed to be used with a basket-style blade guard
Comes complete with spring-loaded anti-kickback fingers

Product Overview

The Biesemeyer 78-963 T-square Anti-kickback Snap-in Spreader for DELTA Contractors Table Saws fits all right-tilting and tilting arbor DELTA contractor saws. Designed to reduce dangerous kickbacks, this snap-in spreader increases table safety. This spreader snaps on instantly and removes easily. Designed to be used with a basket-style blade guard, this spreader is not intended to be used with a thin kerf blade (minimum saw blade thickness is 1/8 inches). This spreader comes complete with spring-loaded anti-kickback fingers.

Friday, October 28, 2011

Triton SCA001 12 Amp 7-1/4-Inch Benchtop Steel Cutting Saw

Triton SCA001 12 Amp 7-1/4-Inch Benchtop Steel Cutting Saw Review

Product Feature

· High quality blade supplies a smooth, clean cut with minimal burring and no abrasive dust
· Efficient cutting action dramatically reduces heat build up and prevents charring on coated finishes
· Long-life Tungsten blade outlasts many abrasive discs combined
· World's safest saw. Fully enclosed blade before, during and after the cut
· Capable of 90 degree and 45 degree cuts on mild steel up to 2 inches

Product Overview

Triton introduces another world design first: a revolutionary new steel cutting saw unlike any other metal saw in the world. The worlds safest saw, we think so. Ingenious design improvements, such as an enclosed blade before, during and after the cut set this saw apart from any other on the world market. The triton steel cut-off saw uses a long-life tungsten carbide tipped blade in place of a traditional abrasive disc. The tungsten blade outlasts many abrasive discs and creates a smooth, clean cut with much less burring and no abrasive dust. Any metal shavings are collected in a drawer for convenient disposal.the Efficient cutting action dramatically reduces heat build up and prevents charring on coated finishes. Cut work pieces can be handled immediately. The saw is capable of 90 degree and 45 degree cuts on mild steel sections up to 2 In. semi automatic work clamps secure the work for

Related Products

Tuesday, October 25, 2011

Laguna Tools 10" x 5/8 x 48t Triple Chip Tooth Blade

Laguna Tools 10" x 5/8 x 48t Triple Chip Tooth Blade Review

Product Overview

Triple Chip Tooth Blades, adjustable with spacer rings to match kerf of cut-off saw.

Monday, October 24, 2011

General Tools 22 Brass Saw Blade Depth Gage

General Tools 22 Brass Saw Blade Depth Gage Review

Product Feature

Returns will not be honored on this closeout item

Product Overview

Make precision table saw cuts every time with this aluminum Step Gauge. Just place the step gauge over the saw blade and raise the blade until it contacts the height you choose. Also includes easy-to-read decimals equivalents.

Sunday, October 23, 2011

QEP 60084A 4-Inch Portable Tile Saw with Water Cooling System

QEP 60084A 4-Inch Portable Tile Saw with Water Cooling System Review

Product Feature

UL approved, 1/3 HP, 1.5 amp, 120 volt, direct-drive motor
Includes a 7 inch continuous rim wet diamond blade
Large, durable cutting table to support large tiles
Adjustable rip, angle and tilt-up table for accurate cuts
Open table top design provides unlimited tile size cutting for both rip and angle cuts

Product Overview

Qep Tile Tools 60084A 4" Portable Wet Tile SawQ.E.P. Co., Inc. has been a driving force in the continued growth and modernization of specialty tools, especially those found in the flooring installation markets, since 1979.Qep Tile Tools 60084A 4" Portable Wet Tile Saw Features:; Portable design tile saw; Direct drive motor is Quiet and vibration free; Great for cutting ceramic, slate, marble, granite, and porcelain; 10316: 3/16", 200 per card; Large durable cutting table for support of large tiles

Related Products

Tuesday, October 18, 2011

Freud LU84M011 10-Inch 50 Tooth ATB Combination Saw Blade with 5/8-Inch Arbor

Freud LU84M011 10-Inch 50 Tooth ATB Combination Saw Blade with 5/8-Inch Arbor Review

Product Feature

Thick MicroGrain carbide tips
Laser cut blade body
Kickback reducing design
Tri-metal brazing for impact-resistant tips

Product Overview

In many woodworking shops, one saw must serve multiple purposes such as rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. This 10" combination carbide-tipped blade meets the challenge. The blades groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting, plus a large gullet for effective chip clearance. The blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate combination blade, there is no need for stabilizers.

Related Products

Sunday, October 16, 2011

Proxxon 37070 FET Table Saw

Proxxon 37070 FET Table Saw Review

Product Feature

For fine mechanics, model building, mould construction, toy manufacture, architects, model carpenters and fitters
For cutting wood, non-ferrous metals, plastics, plexiglas, glass fibre reinforced sheets, foam and many other materials
Stable construction because load bearing parts and plane milled table are made of die cast aluminum
Angle stop with stop rail of aluminum and adjustable limit stop for manufacturing parts of equal length and the same angle
Extendable table extension with integrated auxiliary stop

Product Overview

Perfectly straight cuts. For fine mechanics, model building, mould construction, toy manufacture, architects, model carpenters and fitters.For cutting wood, non-ferrous metals, plastics, Plexiglas, glass fibre reinforced sheets, foam and many other materials. Stable construction because load bearing parts and plane-milled table are made of die-cast aluminium. The micro-adjustable, precise and stable longitudinal stop provides decisive advantages: Corrections even smaller than 0.004" (1/10mm) can be made after coarse adjustment using an adjusting screw. The height is adjustable and 45° tiltable saw blade makes it possible to cut double mitres when used together with the angle stop. Low-noise drive using DC special motor with compound belt driver. Ball-bearinged saw blade shaft. Tungsten tipped saw blade Ø 3 9/64" (80mm) x 1/16" (1.6mm) x 13/32" (10mm) (24 T). Additional work piece pusher and non-slotted ABS sawing gap cover for tight tolerances between saw blade and table. Technical data:110 - 120V AC. 60Hz. 7,000rpm. Mitre infinitely adjustable up to 45°. Table size 12" x 12" (300 x 300mm). Cutting depth 0.04 - 5/6" (1 - 22mm). Saw blades between 2 - 3 11/32" (50 - 85mm) can be used (with 13/32" (10mm) centre hole). Weight approx. 12 lb (6kg).

Related Products

Saturday, October 15, 2011

Freud LU88R010 10-Inch 60 Tooth ATB Thin Kerf Crosscutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Freud LU88R010 10-Inch 60 Tooth ATB Thin Kerf Crosscutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating Review

Product Feature

Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
Thin kerf requires less power and allows for faster feed rate. Ideal for saws under 3 HP.
Laser cut anti-vibration slots reduces the vibration that resonates in standard blades extending the blade life.
Tri-Metal Brazing for impact-resistant tips and precision tensioning keep the blades flat and true.
Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up

Product Overview

This 10" Perma-Shield coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods, and moldings. The coated blade pulls 1/3 less on the saw, which translates into 33 more cutting power. The thin kerf blade (.090) removes less material than standard carbide blades, thus requiring less horsepower to produce equally good results. 5/8" arbor

Related Products

Thursday, October 13, 2011

Shark Pro-series (5 Pack) 10 inch 32 Teeth Carbide 5/8" arbor hole Thin Kerf ATB Table Saw Blade "Ship FREE buy $50+"

Shark Pro-series (5 Pack) 10 inch 32 Teeth Carbide 5/8" arbor hole Thin Kerf ATB Table Saw Blade "Ship FREE buy +" Review

Product Feature

Meets or Exceeds Quality of Most All other Major Brands
Performance Guaranteed
Fully Hardened "Tool-Steel" Body for Increased Blade Stability
8% COBALT C-3 CarbideTips are More Durable & Stay Sharp Longer
Alternate Tooth Bevel grinding (ATB) for Faster & Smoother Cutting

Product Overview

*Professional Grade. *Faster Cutting Thin Kerf Design. *High Silver Content Tip Brazing transfers heat more efficiently from the tip for increased Sharpness Life of the Carbide Tip. *True-Running Precision Ground Body provides Smoother Cleaner Cuts. *Expansion-Slots provide Blade-Distortion Relief. *Shark-Fin Heat Vents prevents Warping. *Blade Body is Flattened to Twice that of Industry Standards for Greater Cutting Accuracy. *Anti-kickback shoulders reduce material kickback providing a Safer & Smoother cutting.

Monday, October 10, 2011

Makita 5402NA 16-5/16-Inch Circular Saw

Makita 5402NA 16-5/16-Inch Circular Saw Review

Product Feature

Large capacity blade cuts 6-1/4¿ at 90° and 4-3/16¿ at 45°
Weighs only 28.7 pounds for ease of operation
Electric brake for maximum productivity
Powerful motor delivers 1,800 max watts out
Low noise level at only 87dB for quiet operation

Product Overview

Large capacity for beam and timber cutting; Electric brake for maximum productivity; Powerful motor delivers 1800 max watts out; Low noise level at only 87dB; Blade stabilizer; Large depth control lever; Includes: 32 Tooth carbide tipped blade (A-90956), Hex Wrench (783204-6), and Rip fence (164019-4)

Related Products

Sunday, October 9, 2011

010-080, 10" x 80 Tooth Laminate Saw Blade x 1/8" Kerf, 5/8" Arbor

010-080, 10" x 80 Tooth Laminate Saw Blade x 1/8" Kerf, 5/8" Arbor Review

Product Feature

C.N.C. laser cut premium steel body, individually heat treated for maximum strength
Extra thick C-4 micro-grain carbide teeth for ultimate durability a cut quality
Computer designed expansion slots keep the blade runing flat & true under pressure
Nickel Armor coating protects the blades from rust, pitting and resin buildup for a long life

Product Overview

Use this premium Ultra-Smooth blade for remarkable chip-free cuts in two-sided laminates and delicate veneered plywood. We've designed the teeth with a very high (40°) alternate top bevel (ATB) grind to slice through the toughest material with ease, leaving your work without splinters or nicked edges, top or bottom. These high, sharp points slice the edge of the kerf first to eliminate chipping, even in expensive two-sided melamine and veneered plywood. Every sawblade is given our exclusive Nickel Armor coating. This tough and durable Nickel coating extends the life of your blade by preventing rust and eliminating pitch and resin build-up.

Friday, October 7, 2011

Shark Pro-series 10 inch x 40 Teeth Carbide 5/8" arbor hole Thin Kerf ATB Miter Saw Blade "Ship FREE buy $25+"

Shark Pro-series 10 inch x 40 Teeth Carbide 5/8" arbor hole Thin Kerf ATB Miter Saw Blade "Ship FREE buy +" Review

Product Feature

Meets or Exceeds Quality of Most All other Major Brands
Performance Guaranteed
Fully Hardened "Tool-Steel" Body for Increased Blade Stability
8% COBALT C-3 CarbideTips are More Durable & Stay Sharp Longer
Alternate Tooth Bevel grinding (ATB) for Faster & Smoother Cutting

Product Overview

Wednesday, October 5, 2011

World's Best 37414X2 - Sliding Table Saw Blades

World's Best 37414X2 - Sliding Table Saw Blades Review

Product Overview

World's Best 37414X2 - Sliding Table Saw Blades 300mm" Dia., Grind: ST (Sliding Table (Sliding Table Blades)), 60 Teeth, 0.085" Plate, 0.126" Kerf, " Arbor. Use on: SCMI, Griggio. APPLICATION: Cutting plastic-laminated and melamine-faced chip board on si

Monday, October 3, 2011

Forrest MM12106 Miter Master 12-Inch 100 Tooth 5/8-Inch Arbor .105-Inch Kerf Wood Cutting Circular Saw Blade

Forrest MM12106 Miter Master 12-Inch 100 Tooth 5/8-Inch Arbor .105-Inch Kerf Wood Cutting Circular Saw Blade Review

Product Feature

20° Face Hook for easy feed
DOUBLE HARD and 40% STRONGER C-4 CARBIDE will give up to 300% longer life between sharpenings.
Ends second-step finishing (jointing and sanding not required).
Buy and sharpen ONE blade instead of 3, (24T Rip, 50T Combination, 80T Crosscut).
Ends cutting 1/16" oversize to allow for RESURFACING

Product Overview

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 2 Saw Blade For Table Saws. With this one all purpose blade you can RIP & CROSSCUT 1' to 2' hardwood and softwood resulting in a smooth as sanded surface. Ply-veneers of oak and birch will crosscut with NO BOTTOM SPLINTER at moderate feed rates. Customized Forrest Woodworker 2 For Table Saws. For the advanced table saw operator. Ideal for joinery and special uses. Specially engineered clearances on the carbide teeth can totally eliminate side scoring. The result...no planing/jointing or sanding. In many cases a glue-line cut can be obtained, depending on the accuracy of the saw machine.20ï¿½ï¿½ Face Hook for easy feedDOUBLE HARD and 40% STRONGER C-4 CARBIDE will give up to 300% longer life between sharpenings.Ends second-step finishing (jointing and sanding not required).Buy and sharpen ONE blade instead of 3, (24T Rip, 50T Combination, 80T Crosscut).Ends cutting 1/16' oversize to allow for RESURFACING

Saturday, October 1, 2011

Porter Cable 7257740 7-1/4-Inch 40T Carbide Saw Blade Smooth Cut Combination

Porter Cable 7257740 7-1/4-Inch 40T Carbide Saw Blade Smooth Cut Combination Review

Product Feature

For construction, industrial and commercial applications
Good for high production applications such as cabinetmaking, furniture making and woodworking
Resharpenable carbide
Made in USA

Product Overview

These ATB blades are manufactured to close tolerances and are fully balanced before leaving the factory. All the carbide-tipped teeth are precisely ground to give a smooth cut every time. The pattern of the teeth is alternate top bevel and the saw kerf is approx. 1/8". These blades have proven themselves in thousands of cabinet shops around the country. Manufactured for heavy-duty use.